|
Post by terryble on Aug 9, 2010 7:36:22 GMT -8
[glow=red,2,300] Saga BLM LED Projector Lamp[/glow]The price for the item is RM560.00 PER PAIRDescription*The item is made by local ISO 9001 Certified manufacturer *It comes with three (3) months of warranty for LED Malfunction & Leaking *The projector head is fully adjustable *No modification or wiring changes needed, just plug and play *2 sets of H1 bulbs is needed (unable to use back the original H4)
<sorry for wrong info given previously> Terms & Conditions*Strongly prefer COD within Klang Valley only, RM20.00 deposit is required for order confirmation. *Price is relatively FIRM & EXCLUDE INSTALLATION ( negotiable if more than 1 unit is ordered) *Pure online seller, no shop *All serious buyers plz contact me via my HP 012-637 2893. SPECIAL DISCOUNT (>RM50) WILL BE GIVEN TO 1ST BUYER!!!^Please also note that the LED Tail Lamp is releasing soon early this October^Version 1.2 (Updated: 24/8/10)
|
|
|
Post by >dzul242 on Aug 10, 2010 22:36:24 GMT -8
rm560?
cheapest among others..
|
|
|
Post by haizal ~101~ on Aug 11, 2010 0:53:04 GMT -8
ye loo
|
|
|
Post by terryble on Aug 11, 2010 6:10:53 GMT -8
Hmm....removed the wordings >.< But yes...the price i offer for this item is cheaper than my competitors This is a pair of lamps...not just the LED or projector head... Check out the link below...They are selling for RM660 and i think Brothers is RM699.... But my price?? RM560...so plz tell me im the cheapest... www.e-kereta.com/v2/showproduct.php?product=50797&cat=19
|
|
liam1437
Junior BLM-er
take care, God bless
Posts: 90
|
Post by liam1437 on Aug 11, 2010 6:53:51 GMT -8
Hmm....removed the wordings >.< But my price?? RM560...so plz tell me im the cheapest... ok YOU are the CHEAPEST =P
|
|
|
Post by almostthere on Aug 11, 2010 7:40:52 GMT -8
serious plug and play bro? Meaning I just straight swap over can already? And I assume bulb all provided?
|
|
|
Post by terryble on Aug 11, 2010 17:05:54 GMT -8
Thanks Liam Yes the item just plug and play.. Do NOT need wiring changes.. You can always use back your original bulbs
|
|
|
Post by almostthere on Aug 11, 2010 17:40:15 GMT -8
Huh? Please clarify as IINM this would require 2 sets of bulbs right? Both H1 presumably. BLM's OEM uses only 1 H7 for the main and hi beam
|
|
|
Post by siuyi (10) on Aug 11, 2010 18:57:35 GMT -8
almostthere i tot H4?
|
|
|
Post by almostthere on Aug 11, 2010 19:03:44 GMT -8
erkk...sorry...Thanks for correcting siuyi. It's H4
and BTW, TS kindly PM your best price
|
|
|
Post by terryble on Aug 11, 2010 22:07:10 GMT -8
Plz let me clarify...
again no wiring changes is needed as they built in for the lamp... the hi lo beam for the projector lamp is separated...
Yes... u need to buy a set of H4 bulbs for it...and can use back 1 set of ur ori bulbs...
|
|
|
Post by almostthere on Aug 12, 2010 1:48:20 GMT -8
UGPM and your reply better be good as I'm getting very different information elsewhere
|
|
|
Post by siuyi (10) on Aug 12, 2010 2:06:28 GMT -8
almostthere ganas woi ko.hahaha.
|
|
sagabot307
Junior BLM-er
rembat boleh...cucuk jangan!!!!
Posts: 74
|
Post by sagabot307 on Aug 12, 2010 10:31:57 GMT -8
rm560 per pair???
|
|
|
Post by (<234>K-Rel) on Aug 12, 2010 11:17:58 GMT -8
not bad
|
|
|
Post by FlyMe 7 on Aug 12, 2010 16:32:30 GMT -8
|
|
|
Post by almostthere on Aug 12, 2010 20:03:13 GMT -8
Learn not to spam...ada tempat dan masa dia
|
|
|
Post by terryble on Aug 12, 2010 21:32:49 GMT -8
Sorry...wrong info given previously... but once again confirmed that no wiring changes is needed...it is built in for the lamp... however u need to buy 2 sets of H1 bulbs for this item...
|
|
|
Post by FlyMe 7 on Aug 19, 2010 4:46:37 GMT -8
got price 490 at mudah lorhh..still same price?
|
|
|
Post by *Azam* [321] on Aug 22, 2010 5:56:50 GMT -8
Interesting... Hehehe
|
|